Ducati 1198

• OE replica air duct covers (larger than small version)

• Smaller air duct cover design, easier access to air duct area

• Fits to OE biposto seat & CDT Elite Series OEM Tail Section (Street Version)
• OPP recommends an Aluminized Heat Barrier to protect the tail section/antidraft from exhaust heat damage.

• Not clear-coated for weight savings
• Designed to work with CDT Elite Series Solo Seat Tail (Race Version)
• OPP recommends an Aluminized Heat Barrier to protect the tail section/antidraft from exhaust heat damage.

• Designed to work with Solo Tail (Street)
• This piece is different than the antidraft for OE seat, and does not fit to the OE biposto seat
• OPP recommends an Aluminized Heat Barrier to protect the tail section/antidraft from exhaust heat damage.

• Listing includes 1 x vertical and 1 x horizontal Cam Belt covers

• Not clear-coated for weight savings
• Installs using DEI Thermal Tuning Heat Resistant Sealant / Adhesive (not included)

• Designed for larger 70mm Termignoni exhaust
• Does not fit to stock OE exhaust

• Reinforced with Carbon Kevlar on the inside for additional strength and protection

• Fits Ducati 1098 & 1198 & 848 and Ohlins SBK Forks
• Ducati Desmosedici front fender

• Ducati Monster 696 / 796 / 1100 / 1100 EVO front fender
• Also fits Ducati 848 / 1098 / 1198

• OEM Capacity
• Carbon Kevlar Construction w/ Epoxy resin
• Fits OEM or aftermarket Gas Cap
• High Quality Vacuum-Bag pre-preg Carbon
• Super Shiny
• UV Clearcoated.
• Ready to Install

• Features cosmetic cutouts on the heel guards

• Does not feature cosmetic cutouts

• Please click here for mounting instructions
  

• Not clear-coated for weight savings
• Designed to work with Upper (Race) and Radiator Shroud (Race)

• Designed to work with Upper (Street) and Radiator Shroud (Street)
• Street version is clear-coated and fits to OE components

• Not clear-coated for weight savings
• Enclosed belly pan, retains up to 5 litres of fluids
• OPP recommends a Thermal Protection Kit to protect the lower from exhaust heat damage

• OPP recommends a OPP Thermal Protection Kit (V-Twin - Fiberglass or Carbon) to protect the lower from exhaust heat damage
• Street version belly pan retains OE bottom cut-outs for access to oil drain plugs, etc.

• This cover is attached over the existing magnet cover
• Install with DEI Thermal Tuning Heat Resistant Sealant / Adhesive (not included)

• Listing is for 1 set of mirror housings (left & right)
• Does not include turn signals or mirror glass
• Reinforced with Carbon Kevlar on the inside for additional strength

• Item includes 1 x brake reservoir mounting bracket & 1 x clutch reservoir mounting bracket

• Entire air duct tube is a Monoblock construction (not glued from 2 pieces)!!
• Fits to OE upper fairing or CDT Elite Series Upper Fairing (Street Version)
• Replica of the OE airducts

• OE Tail light cutouts included
• Does not fit the R models due to traction control unit under tail
  
• Accommodates stock rider seat & stock passenger seat
• OPP recommends an Aluminized Heat Barrier to protect the tail section/antidraft from exhaust heat damage.

• Oversized airducts for more air flow
• Listing is for 1 x left & 1 x right pair of air ducts
• Only fits to CDT Elite Series Upper Fairing with Oversized Airduct Opening (Race Version), does not fit to OEM upper fairing
• Made from monoblock design - entire airduct is 1 piece, not multiple pieces glued together

• Designed to replace the OE rubber lumbar pad
• Seat cover includes carbon subframe for mounting

• Designed to work with Upper (Race), Left Side (Race) and Right Side (Race)
• This part does not come polished, dull finish, its hidden!

• Designed to work with Upper (Street), Left Side (Street) and Right Side (Street)

• Fits to OE side panels, CDT Elite Series STREET side panels and CDT Elite Series RACE side panels

• Long version of the rear fender
• Fits to Ducati 848 / 1098 / 1198 with OEM or Akrapovic exhaust

• Installs with three screws (not included)
• Has indent to accommodate larger 70mm Termignoni exhaust pipe

• OEM-style rear fender
• Designed for Ducati 848 & 1098 & 1198 with OEM exhausts

• Not clear-coated for weight savings
• Designed to work with Upper (Race) and Radiator Shroud (Race)

• Designed to work with Upper (Street) and Radiator Shroud (Street)
• Street version is clear-coated and fits to OE components

• Race version - No Tail Light Cutouts
• No passenger seat - non-removable built in solo cowl
• OPP recommends an Aluminized Heat Barrier to protect the tail section/antidraft from exhaust heat damage.

• Item includes 1 x CDT Elite Series Solo Seat Tail Section (Street Version) & 1 x CDT Elite Series Antidraft for Solo Tail (Street)

• Accommodates OE rider seat, does not accommodate passenger seat (built in solo seat cowl)
  
• OE Tail light cutouts included
• OPP recommends an Aluminized Heat Barrier to protect the tail section/antidraft from exhaust heat damage.

• Set includes 1 x Solo seat & 1 x antidraft
• No tail light cut-outs
• Race parts are not clear coated for weight savings

• Listing is for a pair (left & right) of under tank side panels

• OE Headlight cutouts included
• Fits to stock OE airducts & CDT Elite Series OEM Replica Air Ducts (Pair)
• Does not fit with SBK Oversized Airducts
• Designed to work with Radiator Shroud (Street), Left Side (Street) and Right Side (Street)

• Race version - No Headlight Cutouts
• Not clear-coated for weight savings
• Designed to work with Radiator Shroud (Race), Left Side (Race) and Right Side (Race)
• Fits to CDT Elite Series OEM Replica Air Ducts (Pair) & OE air ducts
• Does not work with SBK Oversized Airducts

• Must be used with CDT Elite Series Oversized SBK Airducts (Race Version - Pair), does not fit to OEM airducts
• Fits to OE airbox
• Race version - does not have OE headlight holes

• Vents are designed to REPLACE the stock vents

• Not clear-coated for weight savings

• 25% Larger by volume
• Increase HP by 4-6 HP
• Airducts included
• Fits 848-1098-1198 and 1098S-1198S
• Direct replacement from stock one.

Super light bracket for throttle body

• Fits ONLY SBK RACE UPPER
• Larger 20% percent, more air more power
• Wet-layup product Not Same as Elite or Pro Series
• Racing Parts Only NOT show quality

• Fits ONLY SBK RACE UPPER
• Larger 20% percent, more air more power
• Wet-layup product Not Same as Elite or Pro Series
• Racing Parts Only NOT show quality

• Right side
• Designed for DRY clutches
• Installs using original mounting bolts
  

• Carbon clutch cover for different clutch sound

• Right side
• Installs using original mounting bolts
• Open clutch cover gives more agressive sound

• Vacuum infused & polished carbon

• Pro Series: Polished finish & wet lay-up construction, no clear-coat

• Vacuum infused & polished carbon

• Vacuum infused & polished carbon
• Designed for regular exhaust, does not fit to aftermarket exhausts such as Termigoni / Akrapovic with larger exhaust pipes

• Pro Series: Polished finish & wet lay-up construction, no clear-coat

• Pro Series: Polished finish & wet lay-up construction, no clear-coat

• Pro Series: Polished finish & wet lay-up construction, no clear-coat

• No headlights race version
• Fits to oversized sbk air ducts, will not fit stock airducts

• Aluminum SBK stay
• Very light

• With small 3D Italian flag decal

• 4cm longer version for more dirt protection!
• easy to mount, part covers the oem chain guard and is attached with the oem chain guard screw
• mounting instruction included