Yamaha YZF-R1

Twill weave

Clear-coated

Clear coated

Clear coated

Clear coated

Does NOT include chain guard

Sold in Twill weave, standard weave available via special order

Clear coated

Does NOT include chain guard

Sold in Twill weave, standard weave available via special order

• Graves Motorsports Fairing Bracket Standard Tach
• Yamaha R1 (2000-01)

• Graves Motorsports Fairing Bracket Standard Tach
• Yamaha R1 (2002-03)
• "Standard Tach" is designed to mount the standard tach.

• Graves Motorsports Fairing Bracket Standard Tach
• Yamaha R1 (2004-06)
• "Standard Tach" is designed to mount the standard tach.

• OPP/MacMoto Design.
• Follows OEM Yamaha Lines!
• OPP Exclusive truly a must have item for your baby!
• Direct Replacement of OEM airbox

• Improves airflow by 40% for greater top-end horsepower
• Adds 2-3hp
• SuperBike race design
• Used in European SBK Championships
• OPP Exclusive! GSXR Killer!
• Fit on stock bodywork.

• Improves airflow by 40% for greater top-end horsepower
• Adds 2-3hp
• SuperBike race design
• Used in European SBK Championships
• Fit on stock bodywork.
• Must be purchased together with MacMoto Airduct SBK Left, right side air duct not available by itself

• Antidraft for OEM seat ONLY!!
• Required for OEM seat
• Helps in aerodynamics
• Completes tail section.

• For Solo and OEM Tail & Superbike Seat
• Required for Solo Seat & OEM Tail & Superbike Seat
• Adds Aerodynamic look

• For Solo and OEM seats only
• Seals the underside of the tail section
• Adds Aerodynamic look

• For Solo and OEM seats only
• Required for Solo Seat
• Adds Aerodynamic look

Seals Solo Seat

Aerodynamic Look

• Right side
• Install with our DEI Thermal Tuning Heat Resistant Sealant / Adhesive

• Right side
• Install with our DEI Thermal Tuning Heat Resistant Sealant / Adhesive

• Right side

• Left side
• Install with our DEI Thermal Tuning Heat Resistant Sealant / Adhesive

• Replaces the OEM faring stay/tachometer support
• Race ONLY !!
• Reduce weight & add Bling Factor
• Super Light and Strong

• protect frame against damage
• adds custom look

• Protect frame against damage

• Now Available!! Tanks are HERE!
• Tank includes SBK gas cap pre-installed
• Large Capacity Endurance Tank 25 Liters!!
• More riding less stops!
• Turn your bike into a REAL SBK Machine!
• Weight is 5.8 POUNDS !!!!
• HUGE 27 L/Q Tank

• Now Available!! Tanks are HERE!
• Tank includes SBK gas cap pre-installed
• Large Capacity Endurance Tank 25 Liters!!
• More riding less stops!
• Turn your bike into a REAL SBK Machine!
• Weight is 5.8 POUNDS !!!!
• HUGE 27 L/Q Tank

• Covers Tachometer
• Adds that custom trick look

• Protects from Crash Damage
• Left side
• Install with our DEI Thermal Tuning Heat Resistant Sealant / Adhesive

• Fits only with MacMoto race fairings
• Left side panel only

• AMA Approved
• Retains 4L/4Qt fluid
• Thermal Protection Kit is highly recommended with each lower!

AMA Approved

Retains 4L/4Qt fluid

Thermal Protection Kit is highly recommended with each lower!

• AMA Approved
• Retains 4L/4Qt fluid
• Thermal Protection Kit is highly recommended with each lower!

• Fits only with MacMoto race fairings
• AMA Approved
• Retains 4L/4Qt fluid
• Thermal Protection Kit is highly recommended with each lower!

Dual Rider

Uses OEM Seat

Antidraft option

• Protects from Crash Damage
• Left side

• Protects Rear Shock from dirt

• Protects Rear Shock from dirt

• Fits only with MacMoto race fairings
• Right side panel only

• Single Rider
• Uses OEM Seat
• Antidraft option

• Single Rider
• Uses OEM Seat
• Requires antidraft to seal underneath

Single Rider

Uses OEM Seat

Antidraft option

• OPP Exclusive!
• Single Rider, uses OEM Seat
• Features integrated seat cover
• Requires antidraft to seal underneath

• This version has the tail light cut-out
• Tail lights can be fitted with no modifications

• Single Rider
• Utilizes SBK Foam Pad

• Single Rider
• Utilizes SBK Foam Pad

• Single Rider
• Utilizes SBK Foam Pad

• Protects swing arm from damage
• Add MotoGP style
• Style and Function is everything

• Race no headlight holes
• Does not fit to OE lower fairings

• This SBK replica has a larger front for graphics or number plate
• Race fairings only, headlight cut-outs no longer available
• Requires OPP windscreen to install

• Upper Fairing with custom 1 side headlight only
• OE headlights is still used but you have to cut it in half

• Set contains airducts (pair) and short frame protectors (pair)
• Frame protectors require Pro Form Fast Cure Urethane Adhesive to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (not included

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (not included

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Designed to fit racing fairings only (no headlights)

• For racing use

• For racing use

Requires Fast Cure Urethane to mount (purchased separately)

• Requires Fast Cure Urethane to mount (purchased separately)

Requires Fast Cure Urethane to mount (purchased separately)

Requires Fast Cure Urethane to mount (purchased separately)

Requires Fast Cure Urethane to mount (purchased separately)

Requires Fast Cure Urethane to mount (purchased separately)

Kit contains Upper fairing (race no-headlights) and lower fairing

• Kit contains Endurance style upper fairing (single endurance headlight cut-out) and lower fairing, endurance light not included

Requires Fast Cure Urethane to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (not included

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

• Requires DEI Heat Resistant Sealant to mount (purchased separately)

Designed for racing use

• Designed to fit racing fairings only (no headlights)

Designed for racing bodywork only

Requires Superbike Seat foam as you will not mount your OEM seat (purchased separately)

• Listing is for 1 x superbike seat and 1 x matching antidraft

Requires Fast Cure Urethane to mount (purchased separately)

Requires Fast Cure Urethane to mount (purchased separately)

Requires Fast Cure Urethane to mount (purchased separately)

• Piece sticks on with 3M double-sided tape (not included)

• Kit contains Upper fairing (race no-headlights), left & right side panels and lower fairing

• Kit contains Upper fairing (race no-headlights), left & right side panels and lower fairing

• Kit contains Upper fairing (race no-headlights) and lower fairing

• Kit contains Upper fairing (race no-headlights) and lower fairing

Listing for 1 pair of airducts (left & Right)

Fits to Sharkskinz Solo Seat

AMA Approved

Retains 4L/4Qt fluid

Thermal Protection Kit is highly recommended with each lower!

Single rider

Utilizes OEM Seat

Antidraft Not Included

• Does not fit to stock windscreen, fits to Zero Gravity racing windscreen