Honda CBR600RR 2003-2004 (MacMoto Series)




Aprilia

Benelli

BMW

Ducati

Honda

Kawasaki

KTM

MV Agusta

Suzuki

Triumph

Yamaha


Lighting/Undertail Kits

Fenders & Huggers

SBK Airducts

Frame Sliders

Engine Case Covers

Carbon Mirrors

Fuel Tanks

Gas Caps

Fairing Stays/Subframes

Clip-Ons

Rear Sets

Nuts/Bolts & Clips

Seat Foam/Tank Foam

Windscreens

Bike Stands


Exhausts

Exhaust Shielding

Fuel Management

Brisk Sparkplugs

Brakes/Controls

Street/Racing Parts

Chains & Sprockets

Suspension/Dampers

Wheels/Rims

Tires / Tire Warmers

Endurance/SBK Racing


Knee sliders

Boots

Clothing & Stuff

Body Work > Honda > 600

Honda CBR600RR 2003-2004 (MacMoto Series)

Honda CBR600RR 2003-2004 (HRC Replica): This bodywork is an authentic replica of 2003 HRC race bodywork. Customers need to purchase the upper, lower, side panels and tank cover together to replace their front fairings. Headlights cutouts are available for this bodywork at extra cost. Contact us for the latest pricing.

The complete kit listed is an OPP recommendation only to illustrate a basic set of bodywork. Build your own kit by purchasing each part individually.

Installing Bodywork: An Introduction for Do-It-Yourself New Installers - Before purchasing your OPP bodywork, educate yourself about the intricacies of aftermarket bodywork and installation through our informative article.

Parts Available	Part Number	Fiber Glass -	Carbon Kevlar -	Carbon Fiber -	Titanium Silver -
MacMoto Series - COMPLETE FAIRING KIT - CBR 600RR 03-04 (upper, right side, left side, lower, tank cover, solo seat)	OH038001	$1050.00	$2285.00	$2285.00	$2430.00
MacMoto Series - Upper HRC - CBR600RR 2003-2004 OEM headlight hole option available at extra cost Fits only with HRC bodywork	OH038002	$245.00	$445.00	$445.00	$490.00
MacMoto Series - Right Side HRC - CBR600RR 2003-2004 Fits only with HRC bodywork	OH038004	$85.00	$195.00	$195.00	$205.00
MacMoto Series - Left Side HRC - CBR600RR 2003-2004 Fits only with HRC bodywork	OH038005	$85.00	$195.00	$195.00	$205.00
MacMoto Series - Lower HRC - CBR600RR 2003-2004 AMA Approved Retains 4L/4Qt fluid Thermal Protection Kit is highly recommended with each lower! Will NOT FIT with OEM bodywork!! Works only with other HRC bodywork!!	OH038006	$205.00	$455.00	$455.00	$480.00
MacMoto Series - Tank Cover HRC - CBR600RR 2003-2004 Two piece (tank cover plus carbon flap) Fits only with HRC bodywork	OH038041	$195.00	$475.00	$475.00	$505.00
MacMoto Series - Tank Cover HRC Lap Timer Cover - CBR600RR 2003-2004 Cover for HRC Tank Cover Fits CBR600RR 2003-2004 HRC Tank Cover HRC Tank Cover sold separately	OH038041A	N/A	N/A	$75.00	N/A
MacMoto Series - Tank Cover without Airduct Covers - CBR600RR 2003-2006 Replaces the OEM tank cover For use with stock 2003-2006 bodywork Does not fit to OPP HRC 2003-2004 bodywork (see TANK COVER HRC CBR 600RR 03-04)	OH042042	$215.00	$510.00	$510.00	$520.00
MacMoto Series - Solo Seat Tail - CBR600RR 2003-2004 Single rider Utilizes OEM Seat	OH038008	$235.00	$520.00	$520.00	$545.00
MacMoto Series - Superbike Tail HRC - CBR600RR 2003-2004 Single Rider Utilizes SBK Foam Pad	OH038057	$250.00	$520.00	$520.00	$570.00
MacMoto Series - Superbike Tail (HRC 2-Piece) - CBR600RR 2003-2004 Single Rider Utilizes SBK Foam Pad	OH038057B	$270.00	$575.00	$575.00	$610.00
MacMoto Series - OEM Tail - CBR600RR 2003-2004 Fits OEM Light Fits OEM Undertail Replaces OEM tail section Accepts Passenger Seat	OH038013	$255.00	$545.00	$545.00	$575.00
MacMoto Series - Passenger Seat Cover - CBR600RR 03-04-05-06 Passenger Cover Transforms OEM seat to Solo Seat Fits Years 03-04-05-06	OH038056	N/A	$255.00	$255.00	$270.00
MacMoto Series - Front Fender - CBR600RR 2003-2004	OH038009	N/A	$200.00	$200.00	$205.00
MacMoto Series - Front Fender Vented - CBR600RR 2003-2004 Gives a racing appearance Helps in cooling your brakes Meshing available in Black, Gold or Silver	OHV38009	N/A	$260.00	$260.00	$270.00
MacMoto Series - Rear Fender - CBR600RR 2003-2004 Protects Rear Shock from dirt Shiny Finish Not Like OEM Plastic	OH038010	N/A	$180.00	$180.00	$185.00
MacMoto Series - Engine Cover - CBR600RR 2003-2006 Left side Install with our Heat Resistant Adhesive	OH038016	N/A	$138.00	$138.00	N/A
MacMoto Series - Clutch Cover - CBR600RR 2003-2006 Right side Install with our Heat Resistant Adhesive	OH038026	N/A	$148.00	$148.00	$152.00
MacMoto Series - Chainguard OEM Front - CBR600RR 2003-2006	OH038020	N/A	$80.00	$80.00	$85.00
MacMoto Series - Chainguard OEM Rear - CBR600RR 2003-2006	OH038021	N/A	$80.00	$80.00	$85.00
MacMoto Series - Frame Protectors - CBR600RR 2003-2006 protect frame against damage adds custom look	OH038022	N/A	N/A	$365.00	N/A
MacMoto Series - Swingarm Protector Right - CBR600RR 2003-2004	OH038024	N/A	$135.00	$135.00	$145.00
MacMoto Series - Swingarm Protector Left - CBR600RR 2003-2004	OH038025	N/A	$140.00	$140.00	$150.00
MacMoto Series - Exhaust Shield Mid-Pipe - CBR600RR 2003-2006 Protects your leg form heat Replaces ugly OEM Exhaust Heat Shield Very Nice Accessory	OH038023	N/A	$100.00	$100.00	$105.00
MacMoto Series - Shark Guard - Universal Protects Rider 2 Bolts included. 4-6 Layer of Carbon Bullet Proof :) For Flat Bottom Swing-arms	OU000099	N/A	$75.00	$75.00	$80.00
Uni-Bit (for Drilling Bodywork) Universal drill bit (step bit) Excellent for motorcycle bodywork drilling Used in drilling mounting points	OUN-BIT1	N/A	N/A	N/A	N/A
MacMoto Series - Rear Brake Line Guard or Shark Guard Protects Rider 4-6 Layer of Carbon Bullet Proof :) For Flat Bottom Swing-arms For Flat Top Swing-arms	OU000098	N/A	N/A	$75.00	N/A

	MAIN \| PLACE ORDER NOW \| CONTACT \| CALL US 604.942.6744 8-7 M-F (pacific time)	Site by Neo Era
	THIS ENTIRE SITE IS © 1999-2010 OPTIMUM PERFORMANCE PRODUCTS INC. PLEASE READ OUR COPYRIGHT AND LIABILITY STATEMENT