  |
|
Home
>
Brisk Sparkplugs
 BRISK SPARKPLUGS
 |
Brisk Premium Motorcycle Spark Plugs are unique spark plugs that are designed to increase horsepower, increase acceleration, improve throttle response, reduce emissions, improve fuel efficiency AND it will mow your lawn! Just kidding! Brisk was founded in 1935 and collaborates with Lamborghini in their spark plug designs. |
| Yes...the rumors are true: You may read on the forums about how Brisk Racing spark plugs add horsepower and make your bike more aggressive. It's true! Customers have reported gains of 1.5hp for 600cc, 2.0hp for 750cc and 3.0hp for 1000cc engines. Hayabusa and ZX14 owners, expect up to 5hp for your bikes! To find out which spark plug fits your bike, refer to our Brisk Spark Plug Table and search for the correct spark plug by bike model or by the stock plug. |
 |
| Important Installation Note: Brisk Racing Spark Plugs required very little torque to install correctly (10-15 Nm). Overtightening *any* spark plug can damage it. A higher performing spark plug does not need to be *tighter* than a stock bike spark plug. It's a spark plug, not a hex bolt! |
| Less Maintenance:Brisk ZS and LGS motorcycle spark plugs are multi-spark and don't require any gapping. As an added benefit, ZS racing plugs have a maximum life of 12,000 miles (20,000 km) and the LGS spark plugs have a maximum life of 18,000 miles (30,000 km)! |
Complementary Upgrades:
|
BMC Air Filters or K&N Air Filters: Air Filters should be upgraded at the same time to yield maximum performance. These performance air filters allow significantly more airflow into your engine giving it the chance to breathe. They are also easily cleanable and never have to be replaced saving you money in the long run. Bonus!
|
|
Superbike Airducts allows a huge volume of air into the airbox, and is the perfect accompaniment to your new Spark Plugs and high-flow air filter. More combustion & More airflow = More power!
|
|
OPP Smog Block Off Plates allow a rider to remove a redundant emissions control system and lose approximately 1 lbs of unnecessary weight. Remove the emissions system, screw on the block off plates, plug any holes running to the airbox and you're done!
|
|
Velocity Stacks are a popular modification for fine tuning your ride's powerband. Velocity Stacks are available from trusted brands like Graves Motorsports and ER Racing.
|
| Parts Available |
Part # |
Price |
Brisk Plug AR10ZS
Specifications: 10mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Fits Ducati 998, 749-999 and 848/1098 models
Fits Honda CBR600F/600RR and CBR900/929/954/1000RR models
Fits Kawasaki ZX6R and ZX10R models except ZX6R 2007-2008,R6 09 (Use AOR10LGS)
Fits MV Agusta F4 750 and 1000 models
Fits Suzuki GSXR600/750/1000, Hayabusa and TL1000R/S models
Fits Yamaha R1 and R6 models
Check our application chart for your bike
Sold individually |
OPAR10ZS
|
$17.50
|
Brisk Plug BR10ZS
Fits Aprilia RSV1000R 2004+
Check our application chart for your bike
Sold individually |
OPBR10ZS
|
$17.50
|
Brisk Plug AOR10LGS
Specifications: 10mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Fits ZX6R 2007-2008 model
Check our application chart for your bike
These are 2nd generation "AOR10LGS-II" plugs from Brisk
Sold individually |
OPAOR10LGS
|
$17.50
|
Brisk Plug AOR12LGS
Specifications: 10mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPAOR12LGS
|
$17.50
|
Brisk Plug BR10ZC
Specifications: 12mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPBR10ZC
|
$17.50
|
Brisk Plug BOR10LGS
Specifications: 12mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Fits Aprilia Mille/R 1998-2004, RSV Mille Factory 2004 and Tuono 2002-2003 models
Fits Ducati 748-916-996 and S4R 2004-2005 models
Check our application chart for your bike
Sold individually |
OPBOR10LGS
|
$17.50
|
Brisk Plug BOR12LGS
Specifications: 12mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Fits Buell Firebolt, Thunderbolt, Cyclone, Lightning and Blast models
Fits Ducati 620 Mosnter / 695 Monster / 696 Monster
Check our application chart for your bike
Sold individually |
OPBOR12LGS
|
$17.50
|
Brisk Plug BOR14LGS
Specifications: 12mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPBOR14LGS
|
$17.50
|
Brisk Plug DOR11LGS
Specifications: 14mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Fits RC51 SP1 and SP2 models
Check our application chart for your bike
Sold individually |
OPDOR11LGS
|
$12.75
|
Brisk Plug DOR12LGS
Specifications: 14mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPDOR12LGS
|
$12.75
|
Brisk Plug DOR14IR
Specifications: 14mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Fits some BMW models
Check our application chart for your bike
Sold individually |
OPDOR14IR
|
$14.99
|
Brisk Plug DOR14LGS
Specifications: 14mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Fits some BMW models
Check our application chart for your bike
Sold individually |
OPDOR14LGS
|
$12.75
|
Brisk Plug DOR15LGS
Specifications: 14mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPDOR15LGS
|
$12.75
|
Brisk Plug LOR12LGS
Specifications: 14mm thread, 3/4"(19mm) reach, 13/16"(21mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPLOR12LGS
|
$12.75
|
Brisk Plug LOR14LGS
Specifications: 14mm thread, 3/4"(19mm) reach, 13/16"(21mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPLOR14LGS
|
$12.75
|
Brisk Plug LOR15LGS
Specifications: 14mm thread, 3/4"(19mm) reach, 13/16"(21mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPLOR15LGS
|
$12.75
|
Brisk Plug LOR17LGS
Specifications: 14mm thread, 3/4"(19mm) reach, 13/16"(21mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPLOR17LGS
|
$12.75
|
Brisk Plug L10ZS
Specifications: 14mm thread, 3/4"(19mm) reach, 13/16"(21mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPL10ZS
|
$10.99
|
Brisk Plug L11S
Specifications: 14mm thread, 3/4"(19mm) reach, 13/16"(21mm) hex, gasket seat
Check our application chart for your bike
Sold individually |
OPL11S
|
$12.75
|
Brisk Spark Plugs - DOR10LGS
|
OPDOR10LGS
|
$13.50
|
Brisk Spark Plugs - DR10ZS
|
OPDR10ZS
|
$13.50
|
Brisk Plug - BR12S Special order only
Replacement for 6R12 / 6R12G / 6R12PP Harley plug
Replacement for EX12S Screamin' Eagle plug |
OPBR12S
|
$12.50
|
Brisk Plug - UR17
Special Order Only |
OPUR17
|
$4.99
|
Brisk Plug - LR12ZS LR12ZS
Special order only
Sold individually |
OPLR12ZS
|
$17.50
|
Brisk Plug - BR14S
Special Order Only |
OPBR14S
|
$12.75
|
Brisk Spark Plugs - BR12YPY Sold individually
Platin / Yttrium type plug |
OPBR12YPY
|
$14.99
|
| A Unique, Patented Design |
| Retracted Ground Electrodes: Brisk Premium Spark Plugs utilize a design where the ground electrode is retracted so the spark discharge occurs at the very tip of the spark plug. The ground electrode design of the traditional spark plug restricts the natural spherical expansion pattern of the flame front.
|
 |
 |
360 degree spark ignition: Brisk Premium Spark Plugs have a 360 degree spark perimeter, unlike conventional spark plugs that confine the spark to one restricted space. Since the fuel/air mixture around the spark plug is constantly changing, this results in a faster and better ignition. An added benefit is that there is no need to index the spark plug! |
| Hotter semi-surface spark discharges: It's easier for a spark to glide along the surface of the insulator than to break through the air gap. Brisk Premium Spark Plugs take advantage of this feature in its design. Almost 2/3 of the spark travel between the electrodes is along the surface of the insulator. The length of the spark discharge is maximized with only a slight increase in the required supplied ignition energy. The higher voltage buildup at the center electrode before the spark-over results in delivering more spark energy into the combustion chamber.
|
 |
 |
Spark Gap Deep in Combustion Chamber: Shifting the spark gap deeper inside the combustion chamber provides better access of the air/fuel mixture to the point of ignition. Since the flame front propagates evenly in all directions the best place for ignition is in the center of the combustion chamber. The compact design of the spark gap minimizes turbulence and therefore increases the volumetric flow. |
| Integrated Ground Electrode: The massive ground electrode is the integrated part of the spark plug shell which provides superior heat removal from the active part of the spark plug, improving the resistance to pre-ignition and electrode burn-off. |
Still not convinced? Check out the Dynos!
Honda of Houston conducted a dyno run on a stock CBR600RR and it shows that Brisk Premium Spark Plugs added 1.5hp! A picture is worth a 1000 words!
While you're at it, you can check out a short section about the technical aspects of Brisk Premium Spark Plugs.
|
|
|