MacMoto Series COMPLETE FAIRING KIT CBR 600RR

• Fits only with HRC bodywork, will not fit with OE bodywork

Product Description

This is a high quality one-piece upper. Our bodywork uses stock mounting points and most parts have drilling points clearly indicated on the bodywork. All mounting points are reinforced with carbon kevlar to provide exceptional strength - an industry first by OPP!

Installation or Technical Notes

• This is original HRC bodywork used in World SuperSport (WSS Europe) Racing. This does not fit OEM bodywork and will only work with a complete HRC kit. Set your bike apart from the crowd. An OPP Exclusive!
• Turn signals are not cut out for OPP uppers. Customers can easily install Gregg's Customs Honda RC51 Flushmount turn signals for OPP uppers without moulded turn signal mounts. Use the appropriate flushmount turn signals for models with moulded turn signals (ex. Honda CBR1000RR). Yes, they will work even if you don't have an RC51.
• 14 Dzus Fasteners are required to fasten an entire bodywork kit.

• Fits only with HRC bodywork

• CBR 600RR 03-04
• HRC Product
• This is an original HRC bodywork used in World Supersport(WSS Europe)Racing.
• Will NOT FIT with OEM bodywork!!
• Works only with other HRC bodywork!!
• Will only fit together with other HRC parts.
• Set your bike apart from the rest of the crowd with this unique custom european look.
• Brought to you exclusively from OPP.

• Fits only with HRC bodywork

• CBR 600RR 03-04
• HRC Product
• This is an original HRC bodywork used in World Supersport(WSS Europe)Racing.
• Will NOT FIT with OEM bodywork!!
• Works only with other HRC bodywork!!
• Will only fit together with other HRC parts.
• Set your bike apart from the rest of the crowd with this unique custom european look.
• Brought to you exclusively from OPP.

NOTE: Fiberglass

1. We use an iso ester resin which is flexible and durable.
2. All mounting points are generously reinforced with carbon Kevlar.
3. Finish is a smooth, pin-hole free surface.
4. Easy to sand, ready to paint, your painter will love you.

NOTE: Kevlar, Carbon, Titanium Fiber

1. We only use epoxy resin, this gives the product both a clear finish, and high flexibility. Unlike polyester resin, high quality epoxy resin does not spider crack
2. Only Kevlar, Carbon, and Titanium is used in our products, 2-3 layers depending on the product type.

• AMA Approved
• Retains 4L/4Qt fluid
• Thermal Protection Kit is highly recommended with each lower!
• Will NOT FIT with OEM bodywork!!
• Works only with other HRC bodywork!!

Product Description

This is a high quality one-piece lower. All lowers are AMA-approved enclosed belly pans and can hold 4L/4QT of oil. Our bodywork uses stock mounting points and most parts have drilling points clearly indicated on the bodywork. All mounting points are reinforced with carbon kevlar to provide exceptional strength - an industry first by OPP!

Installation or Technical Notes

• This is original HRC bodywork used in World SuperSport (WSS Europe) Racing. This does not fit OEM bodywork and will only work with a complete HRC kit. Set your bike apart from the crowd. An OPP Exclusive!
• This bodywork will fit with the OEM exhaust system or a full aftermarket exhaust system (ex. Arata, Akropovic or Sato). OPP recommends the Arata full exhaust system for it's best value, high power gains and exceptional quality.
• 14 Dzus Fasteners are required. This lower must be purchased with the HRC upper, side panels and tank cover. (An additional 4 fasteners are required if you purchase the optional 2-piece HRC tail section.)

Single rider

Utilizes OEM Seat

CBR 600RR 03-04

Solo Seat

This single occupant seat utilizes the stock OEM seat.

Stock mounting points are used for installation

Product must be modified after purchase to fit OEM or aftermarket tail light. For list of our aftermarket tail lights, please click here. NOTE: Fiberglass

1. We use an iso ester resin which is flexible and durable.

    

2. All mounting points are generously reinforced with carbon Kevlar.

    

3. Finish is a smooth, pin-hole free surface.

    

4. Easy to sand, ready to paint, your painter will love you.

NOTE: Kevlar, Carbon, Titanium Fiber

1. We only use epoxy resin, this gives the product both a clear finish, and high flexibility. Unlike polyester resin, high quality epoxy resin does not spider crack.

    

2. Only Kevlar, Carbon, and Titanium is used in our products, 2-3 layers depending on the product type.

• Two piece (tank cover plus carbon flap)
• Fits only with HRC bodywork

CBR 600RR 03-04

HRC Tank Cover

HRC tank cover fits only with the HRC upper.

Includes a 5x7 inch carbon fibre flap which opens to allow for computer adjustment, as well as acting as a aerodynamic location for placement of helmet when in a tucked position.

HRC Product

This is an original HRC bodywork used in World Supersport(WSS Europe)Racing.

Will only fit together with other HRC parts.

Set your bike apart from the rest of the crowd with this unique custom european look.

Brought to you exclusively from OPP.

NOTE: Fiberglass

1. We use an iso ester resin which is flexible and durable.

    

2. All mounting points are generously reinforced with carbon Kevlar.

    

3. Finish is a smooth, pin-hole free surface.

    

4. Easy to sand, ready to paint, your painter will love you.

NOTE: Kevlar, Carbon, Titanium Fiber

1. We only use epoxy resin, this gives the product both a clear finish, and high flexibility. Unlike polyester resin, high quality epoxy resin does not spider crack.

    

2. Only Kevlar, Carbon, and Titanium is used in our products, 2-3 layers depending on the product type.