Show US Pricing Show Canadian Pricing
Please note:

Stage 1+ Performance Calibration with Handheld Tuner - BTM-HHS1K20+

by

BT-Moto

Fits the following bikes
  • BMW S1000RR 2020-2022
Item Number
14521599
Manufacturer #
BTM-HHS1K20+
Availability
Stock status not available
Quantity
Our Price

$895.00 (US)

This item ships FREE within contiguous USA!

Your shopping cart

Item(s):
0
Total:
$0 US

Questions about this product?
E-mail us: [email protected]

Product Description

About the Product


THIS PRODUCT IS 50 STATE LEGAL (C.A.R.B. EO# D-868)

The best new motorcycle on the market!  US and European model S1000RR's have been restricted from the factory with the US models having worse restrictions than its European counterpart. Stage 1 was developed to remove these restrictions and unlock your S1000RR’s full potential, the difference on the 2020 is the most astonishing out of any BMW to date - a must have.


ONE TUNE FOR ALL

Racers at the circuit tracks or the drag strips will appreciate this tune. Thoroughly tested in both aspects by track racers, roll racers and just the casual rider wanting a more exciting bike to ride. 

TRACK RACERS

Track racers can enjoy modified TC (traction control) settings for different tire sizes, smoother throttle transitions/tip-in, consistent and predicable power. All this comes together to make sure you start and finish a turn to the best of the bikes capability. Working directly with MotoAmerica racers really helped us dial in our products for the track.

DRAG / ROLL RACERS

Drag racers have the capability to restrict throttle in first and second gear to make managing wheelies easier. For more top-end than others, we adjust timing, fueling, FTCL (full-time closed loop), SOI (start of injection), EGT, the list goes on and on. Years of experience have helped us squeeze every bit of power from the bike, while keeping it reliable and consistent.

STREET RIDERS

For the casual rider, derestricting the bike is the biggest advantage to our tuning. This makes the bike a blast to ride and gives the rider smile educing power. The throttle is smooth when cruising and brutal when you need it to be. Hundreds of hours and miles go into our tuning and testing. We want to present the best product on the market while leading the pack in customer satisfaction.


WHAT'S INCLUDED IN STAGE 1?

  • De-restricted Throttle +60hp gains in the midrange, and +12whp over the curve!
  • De-restricted Exhaust Valve and intake flappers, open to 100% in certain riding scenarios for best sound and performance
  • Throttle response increased 12% in every race pro 1-3 mode to reach a target of 100% throttle. Road mode de-sensitized for highway cruise, normally jerky
  • Cruise control jerkiness adjusted for highway cruising tip in and out.
  • Better Fueling, cleaned up for maximum fueling economy and horsepower gains
  • Second and third gear transmission limiter removed
  • Enhanced and restructured hard cut rev-limiter
  • Mapping available for different modification combos
  • Heat Management through better fueling, and lower cooling fan strategy
  • A full second off your 60-130mph time!

HOW DO WE ACCOMPLISH THIS WITH STAGE 1?

THROTTLE RESTRICTION / TORQUE / GEAR LIMITATIONS- Giving you the ability to utilize 100% of the throttle is paramount in track situations where you need all the power you can get on demand. The factory file has "dead spots" that may cause the S1000RR to behave in an unpredictable manner when corner exiting. This also means any kind of straight line acceleration also suffers. We remove these factory restrictions to ensure a smooth and predicable throttle, all the way to redline. It's like getting a new engine, all over again! On the 2020 we are the only tuner fully getting the gear restrictions + gear torque limiters removed offering full throttle in 2-3rd gear, the competition is only getting half of this done!

EXHAUST VALVE / INTAKE FLAP- The exhaust valve is a double edged sword. It does good by making back pressure when needed but also hinders the 2020 S1000RR from making the most power possible at mid to upper RPM ranges. The valve closed makes the bike a lot more quiet than if it were open, even slip-on exhaust sounds almost the same as stock due to this valve closing so much. Opening this valve for racing use allows for some horsepower gains, as they are gear and RPM dependent, just like the butterfly valves for the throttle. Lower gears have a smaller valve opening which will reduce overall volume and power by 3-5HP, even in lower RPM’s. Our mapping still utilizes the stock exhaust valve to give you maximum power but also opens it up when you need it most.

FUELING - The 2020 BMW S1000RR fueling is rich for worldwide environment (desert) and longevity purposes but it's overkill. It is also set artificially lean at idle, cruise, and warm up, which results in stalling and cold/hot start issues. The new S1000RR is factory equipped with 5-wire widebands and is very precise on targeting a specific AFR (Air/Fuel Ratio) through a closed loop corrective system from idle to redline. Being factory rich also helps it cool the turtleshell exhaust system. However, fuel can be trimmed for better result as it targets real time fuel corrections.

HEAT MANAGEMENT - Lets face it, this bike rides a little on the hot side. Due to the new exhaust system and idle/cruise AFR mixtures the bike is a recipe to being constantly in the 215+F range and burning your legs while you ride, making it uncomfortable anywhere you’re not going 50+MPH. We have solved this issue by adding our low fan temp modification to this flash as a standard baseline feature along with different cruise mapping which has curbed temps extensively.